SAF and SAW pillow blocks with bearings on an adapter sleeve

Contact Now

The most important advantages of the newly developed pillow block housings SAF can be summarized as follows:The housing has higher strength due to the improved housing design, developed using modern calculation methods. This gives higher security against failure of the housing due to overload.The housing material can be selected in accordance with the requirements of the application, always giving the most economical solution.Stockholding is simplified with the ordering of housings in a universal design, since the housing delivery includes standard seals, locating ring, endcover and grease fitting. They are suitable for spherical roller bearings 222..-K as well as for split spherical roller bearings 222S.Due to the range of seal variants, the correct seal can be selected
taking account of the environmental conditions.Marks indicating the center of the housing as well as machined locating faces allow rapid and precise alignment of the housing.Several predefined mounting points give easier mounting of sensors for condition monitoring and connection of the lubricant supply to the housing.Serial numbers marked on the housing cap and base ensure that the upper and lower housing sections are correctly matched during assembly.

Bearing Number Bore Dia Outer DIa Width Size
skf SAFS 22517 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve Yes (with retaining Bearings with Housin 6004 Flanged Pilot Type
skf SAF 23030 KA x 5.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve Ball 9 Days or more Radial 6
skf SAF 22534 x 5.7/8 SAF and SAW pillow blocks with bearings on an adapter sleeve Medium 1.32 0.38 KGS Open Type
skf SAF 22638 TLC SAF and SAW pillow blocks with bearings on an adapter sleeve Deep Groove Ball Bea Bearings with Housin Available 30
skf SAF 23030 KA x 5.1/8 SAF and SAW pillow blocks with bearings on an adapter sleeve Open Type Steel 27mm 21310-e1-k-c3-qbl
skf SAF 23026 KAT x 4.7/16 SAF and SAW pillow blocks with bearings on an adapter sleeve Quote Insert Bearing Unit Lightweight Stainless Steel
skf SAW 23530 x 5.1/4 SAF and SAW pillow blocks with bearings on an adapter sleeve 8 Days Used for Light load No Insert Bearing Unit
skf SAFS 22530 x 5.1/8 T SAF and SAW pillow blocks with bearings on an adapter sleeve Steel 18mm 0.335 7.8
skf SAW 23534 x 5.7/8 T SAF and SAW pillow blocks with bearings on an adapter sleeve Lock Nut Round shape Metric (fine) Thread M12
skf SAW 23530 x 5.1/8 SAF and SAW pillow blocks with bearings on an adapter sleeve Pillow Type Cast Iron No No Cover
skf SSAFS 22528 x 4.13/16 SAF and SAW pillow blocks with bearings on an adapter sleeve Bearing unit Square flange shape Cylindrical Bore Set 65
skf SAF 23036 KAT x 6.1/2 SAF and SAW pillow blocks with bearings on an adapter sleeve In Stock Standard 1.25 inch klnj1.1/4-zz-r&m
1/17